商品の概要
「日本語翻訳」
記事コード:6521021
寸法:125mm(延長)
立ち上がり
。
"11 cm"
Material:ABS樹脂
仕上げ:ブラックティント(透明)
ねじ山。M6
Led:12V/1,8W
Homologation:EG-BE
Homologation number:e24 00041G / e24 00062F
Important Notes:キャタライザーなしでお届けします。
写真はシルバー/ブラックのアイテムです。
BODYSTYLEのリアハガーエクステンションは、オリジナルのリアハガーよりもリアとドライバーの保護を強化します。このパーツを装着することで、リア、ライセンスプレートホルダー、ウインカー、ドライバーを理想的に汚れから守ります。モデルによって、75~190mmのエクステンションがあります。エクステンションは、塗装可能なマットブラックソリッドカラーのプラスチック製です。
.
取付け準備完了(すべてのパーツが付属します。
「原文」
Article code:6521021
Dimension: 125 mm (extension)
Rising: "11 cm"
Material: ABS plastics
Finish: black tinted (transparent)
Thread: M6
Led: 12V/1,8W
Homologation: EG-BE
Homologation number:e24 00041G / e24 00062F
Important Notes: Delivered without catalyser. Backfitting-catalyser Ø 48 mm item no. 65284052B (see accessories below).
Photo shows item in silver/black.
The BODYSTYLE rear hugger extension offers more protection for rear an driver than the original rear hugger: Rear, license plate holder, indicator and driver are protected ideally against dirt by mounting this part. Depending on model there is an extension between 75 -190 mm. The extension is made of paintable matt black solid-colourd plastics. Delivered with rivets and self adhesive pads for easy fitting.
.
ready to mount (all parts supplied)
記事コード:6521021
寸法:125mm(延長)
立ち上がり
。
"11 cm"
Material:ABS樹脂
仕上げ:ブラックティント(透明)
ねじ山。M6
Led:12V/1,8W
Homologation:EG-BE
Homologation number:e24 00041G / e24 00062F
Important Notes:キャタライザーなしでお届けします。
写真はシルバー/ブラックのアイテムです。
BODYSTYLEのリアハガーエクステンションは、オリジナルのリアハガーよりもリアとドライバーの保護を強化します。このパーツを装着することで、リア、ライセンスプレートホルダー、ウインカー、ドライバーを理想的に汚れから守ります。モデルによって、75~190mmのエクステンションがあります。エクステンションは、塗装可能なマットブラックソリッドカラーのプラスチック製です。
.
取付け準備完了(すべてのパーツが付属します。
「原文」
Article code:6521021
Dimension: 125 mm (extension)
Rising: "11 cm"
Material: ABS plastics
Finish: black tinted (transparent)
Thread: M6
Led: 12V/1,8W
Homologation: EG-BE
Homologation number:e24 00041G / e24 00062F
Important Notes: Delivered without catalyser. Backfitting-catalyser Ø 48 mm item no. 65284052B (see accessories below).
Photo shows item in silver/black.
The BODYSTYLE rear hugger extension offers more protection for rear an driver than the original rear hugger: Rear, license plate holder, indicator and driver are protected ideally against dirt by mounting this part. Depending on model there is an extension between 75 -190 mm. The extension is made of paintable matt black solid-colourd plastics. Delivered with rivets and self adhesive pads for easy fitting.
.
ready to mount (all parts supplied)
特徴
Additional info
- 納期
- メーカー在庫あり!約2-3週間程でお届け可能。