Kawasaki / カワサキ KX F.i. チューニング / カリブレイション コントローラー キット, アップグレード-CD ROM 2016-2022MY | 570110004

10,500 円
表示設定: 在庫あり



商品の概要

「日本語翻訳」

記事番号 : 570110004

このKX F.i. キャリブレーションコントローラーキットは、2012-2018 KX450F、2013-2018 KX250F、2019-2021 KX250/KX450に適用できます。
(適切なケーブルを使用すれば、ソフトウェア自体はMY11-12 KX250FとMY11 KX450Fにも使用できます)
カワサキKX FIキャリブレーションコントローラーは、カラー液晶画面を内蔵した携帯型のツールです。埃に強く(IP-55)簡単に使用できるので、もうノートパソコンを使う必要はありません。
転送ケーブル、診断ケーブル、SDメモリーカード、ユーザーマニュアル、キャリングケースが付属しています。データロギング機能はありません。
ECUへのアクセスは、付属のケーブルを使ってコントローラーに接続するだけで完了します(PCやバッテリーは必要ありません)。
コントローラーは内蔵バッテリーで2時間動作します。PCに地図を保存することができます。コントローラーとPC間のデータ転送はSDカードを介して行われます。EU、UK用のAC電源プラグが付属しています。
7パターンの初期設定を含む。
燃料のリッチ化、リーン化(±5
イグニッションのアドバンスド/リタード設定(±3度
路面の硬い/柔らかいの設定
初心者向け設定
より高度な設定を行うために、スロットル開度や回転数に応じて燃料噴射量や点火時期を調整するECUマップを用意しています。KX FIキャリブレーションコントローラーをECUに接続することで、エンジンの状態を表示することができます。
3 以下の追加部品が必要です。
1 - 26011-0933 リード線(キットとKXの接続用
2A - 11056-0505 BRACKET (上記のケーブルを2016-2018 KX250F/KX450F、2019-2020 KX250に固定するため)
2B - 92037-1794 ブラケット (KX450 2019->2021, KX250 2021->に上記ケーブルを固定するため)
3 - CD-ROM(マッピングと説明書を収録


「原文」

Article Number : 570110004

This KX F.i. Calibration Controller kit can be applied to 2012-2018 KX450F, 2013-2018 KX250F and 2019-2021 KX250/KX450
(with suitable cable the software itself can be used for MY11-12 KX250F and MY11 KX450F)
The Kawasaki KX FI Calibration Controller is a portable handheld tool with a built in color LCD screen. It is resistant to dust (IP-55) easy to use, so no need to use laptop anymore.
It comes with transfer and diagnostic cables, SD memory card, user manual and a carrying case. There is no datalogging function.
Accessing the ECU is accomplished simply by connecting the controller using the provided cables (no PC or battery necessary)
The controller works for 2hr. with built in battery. Maps can be stored on a PC: data transfer between the controller and a PC can be done via SD card. Supplied with AC powerplug for EU and UK.
Including 7 patterns default setting:
Richer or leaner fuel setting (± 5%)
Advanced or retarded ignition setting (± 3 deg.)
Hard or soft riding surface setting
Beginner setting
For more advanced setting optimization, the ECU maps for volume of fuel injected and ignition timing can be adjusted for given throttle position and rpm. When connected to the ECU, the KX FI Calibration Controller can be used to display the status of a running engine.
3 Following additional parts are needed:
1 - 26011-0933 WIRE LEAD (to connect the kit to KX)
2A - 11056-0505 BRACKET (to fix above cable to 2016-2018 KX250F/KX450F, 2019-2020 KX250)
2B - 92037-1794 BRACKET (to fix above cable to KX450 2019->2021, KX250 2021->)
3 - CD-ROM with mappings and instructions

特徴

Additional info
納期
お取り寄せ可能商品。