TOURATECH / ツラーテック エンジンガード 【シルバー】 BMW R1200GS(2013-), R1200GS Adventure(2014-) | 01-045-5135-0
53,800 円
表示設定:
在庫あり
商品の概要
※クリックしてメーカーサイトの写真を見る。
「日本語翻訳」
商品番号:01-045-5135-0
BMW R1200GSを開発するにあたり、BMWの開発者たちは、オフロードへの遠足に誘うようなバイクを生み出しました。このエンジンガードは絶対的な革命です!Touratechはその堅牢性と機能性を重視しています。
最大の強度は、厚さ4mmのアルミニウム製ベースプレートの複数の折り曲げられた隆起によって提供され、エンジン上の追加の下部ステンレススチール製アタッチメントプレートは、衝撃の力が6つのボルトポイントを介して大面積に分散されることを保証します。もう一つの利点は、エンジンガードの前部がオイルフィルターやオイルクーラーへのダメージを防ぐために十分に高くなっていることです。ベース・プレート下部のプラスチック・レールは、すでに沈んでいるボルト・ヘッドを完全に覆っています。プラスチック・レールは、岩や石、木の切り株の上をバイクを「滑らせる」ことを容易にします。
「原文」
Article number: 01-045-5135-0
In creating the BMW R1200GS, the developers at BMW have produced a motorbike that practically invites you take it on an off-road excursion. Our development team were able to make a number of further improvements to its positive off-road characteristics.This engine guard is an absolute revolution!Touratech have attached great importance to its robustness and functionality.Serious damage, such as holes in the engine block, can be effectively prevented by fitting the large Touratech engine guard.
Maximum strength is provided by multiple folded ridges in the 4 mm thick aluminium base plate, while an additional lower stainless steel attachment plate on the engine ensures the force of an impact is distributed over a large area via 6 bolting points. Ground clearance is not restricted by these two base plates.Another benefit is that the front of the engine guard rises up far enough to prevent damage to the oil filter and oil cooler as well.Plastic rails on the lower part of the base plate ensure that the bolt heads - which are already sunken - are completely covered.Not least, the plastic rails facilitate "sliding" the bike over rocks, stones and tree stumps.Almost as an afterthought, they also prevent dirt buid-up.To sum up, the large Touratech engine guard for the BMW R1200GS is a product that meets the most demanding requirements as well as being an absolute visual highlight!
「日本語翻訳」
商品番号:01-045-5135-0
BMW R1200GSを開発するにあたり、BMWの開発者たちは、オフロードへの遠足に誘うようなバイクを生み出しました。このエンジンガードは絶対的な革命です!Touratechはその堅牢性と機能性を重視しています。
最大の強度は、厚さ4mmのアルミニウム製ベースプレートの複数の折り曲げられた隆起によって提供され、エンジン上の追加の下部ステンレススチール製アタッチメントプレートは、衝撃の力が6つのボルトポイントを介して大面積に分散されることを保証します。もう一つの利点は、エンジンガードの前部がオイルフィルターやオイルクーラーへのダメージを防ぐために十分に高くなっていることです。ベース・プレート下部のプラスチック・レールは、すでに沈んでいるボルト・ヘッドを完全に覆っています。プラスチック・レールは、岩や石、木の切り株の上をバイクを「滑らせる」ことを容易にします。
「原文」
Article number: 01-045-5135-0
In creating the BMW R1200GS, the developers at BMW have produced a motorbike that practically invites you take it on an off-road excursion. Our development team were able to make a number of further improvements to its positive off-road characteristics.This engine guard is an absolute revolution!Touratech have attached great importance to its robustness and functionality.Serious damage, such as holes in the engine block, can be effectively prevented by fitting the large Touratech engine guard.
Maximum strength is provided by multiple folded ridges in the 4 mm thick aluminium base plate, while an additional lower stainless steel attachment plate on the engine ensures the force of an impact is distributed over a large area via 6 bolting points. Ground clearance is not restricted by these two base plates.Another benefit is that the front of the engine guard rises up far enough to prevent damage to the oil filter and oil cooler as well.Plastic rails on the lower part of the base plate ensure that the bolt heads - which are already sunken - are completely covered.Not least, the plastic rails facilitate "sliding" the bike over rocks, stones and tree stumps.Almost as an afterthought, they also prevent dirt buid-up.To sum up, the large Touratech engine guard for the BMW R1200GS is a product that meets the most demanding requirements as well as being an absolute visual highlight!
特徴
Additional info
- 納期
- お取り寄せ可能商品。