SW-MOTECH / SWモテック ユニバーサル X-Grip-キット スマホ用. Incl. 1" ball, ソケットアーム X-Grip clamp. | GPS.00.308.30500/B
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
商品の概要
品番:GPS.00.308.30500/B
EAN:4052572053669
大型スマートフォン用ユニバーサルXグリップキット
- クランプアームと1"アダプターボールを備えた汎用性の高いホルダー
- ゴム製のサポートフィンガーでしっかりホールド
- ゴム製のマウントは、さらにスマートフォンを固定します。
- 幅4.4~11.4cmのスマートフォン用
- 最大厚さ2.22cmのスマートフォン用
- 材質:ステンレス/合成樹脂
- カラー:シルバー/ブラック
- ボールと回転式ソケットアームは、個々の位置決めを可能にします。
- ソケットアームは2軸で90°または45°まで回転可能、長さ:55mm、サポートボール用φ24~25.5mm(約1インチ)。
- さまざまな取り付けバリエーション:1"ボールは、M6またはM8スレッド、ミラースレッドホルダー、または取り付けクランプに取り付けることができます。
- 直径22.28mmまたは1インチのハンドルバー用取付クランプ
- 取り付けに追加のアクセサリーは必要ありません
- 特にスリムな機器(最小幅4.4cm)は、高さが14.6cm以上である必要があります。
- 防水保護ケースの使用を推奨します。 保護ケースを装着したスマートフォンは、規定の最大幅、最大厚さを超えないようにしてください。
- RAM X-Grip IV 大型スマートフォン用クランプ
- ゴムマウント
- ソケットアーム
- ゴムインサート付き取付金具
- M8スレッドとM6コンバータ付きボール
- ミラースレッドホルダー
- 取付材料
- 取付方法
「原文」
Part number: GPS.00.308.30500/B
EAN: 4052572053669
Universal X-Grip Kit for large smartphones
This versatile kit is suitable for securely fastening a large smartphone or smartlet to (almost) any motorcycle. The X-Grip clamp captivates with its versatility - it provides secure grip for smartphones and can be flexibly adjusted on a RAM arm with the 1 adapter ball. The rubber fingers of the clamp arms have the smartphone firmly in their grasp and guarantee a clear view and access to the device at the same time. The Universal Kit included in delivery offers a variety of different attachment options. The included 1" ball can be mounted on an M6 or M8 thread, on the mirror thread holder or with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22.28 mm or 1" in. The socket arm we developed is pivotable in two axes up to 90° or 45° and facilitates positioning in the cockpit - this way the display is always in view without obscuring the view of the instruments.
Incl. 1" ball, socket arm, X-Grip IV clamp.
Features of the RAM X-Grip IV clamp- Versatile holder with clamping arm and 1" adapter ball
- Rubberized support finger for secure hold
- A rubber mount additionally secures the smartphone
- For smartphones with a width of 4.4 to 11.4cm
- For smartphones with a maximum thickness of 2.22cm
- Material: Stainless steel / Composite plastic
- Color: Silver / Black
- Balls and pivoted socket arm allow individual positioning
- Socket arm is on two axes and pivotable up to 90° or 45°, length: 55 mm (2.2"), for support balls ø 24 - 25.5 mm (approx. 1")
- Different mounting variations: 1" ball can be mounted on an M6 or M8 thread, on the mirror thread holder or with a mounting clamp
- Mounting clamp for handlebars with a diameter of 22.28 mm or 1"
- No additional accessories are required for the installation
- Particularly slim devices (with minimum width of 4.4cm) must be taller than 14.6cm.
- The use of a waterproof protective case is recommended. The smartphone with protective case must not exceed the specified maximum width and thickness.
- RAM X-Grip IV clamp for large smartphones
- Rubber mount
- Socket arm
- Mounting clamp with rubber inserts
- Ball with M8 thread and M6 converter
- Mirror thread holder
- Mounting material
- Mounting instructions