ヨーロッパのバイク用品専門店「ユーロネットダイレクト」!ネットショップを通しオートバイ部品パーツを現地価格で発送中!
 割引中の商品はこちら!  在庫一掃セール中!  BMW純正カー用品はこちら!BMW純正カー用品・車アクセサリーEuronetdirect バイク用アパレルならユーロネットダイレクトバイク用品通販店バイク用ブーツ、シューズならユーロネットダイレクトバイク用品通販店ヘルメットならユーロネットダイレクトバイク用品通販店

 お客様の声☆  Eng./中文  車種別検索ページへジャンプ-ユーロネットダイレクトバイク用品通販店

TOURATECH / ツアラテック クラッシュバーエクステンション(BMW純正アッパークラッシュバー専用) BMW R1200GS Adventure(2014-●) | 01-045-5165-0

tt_01-045-5165-0
57,100 
(税込み)
+
送料の再計算をする。
1 個(カートも含めた商品の合計数)

納期メーカー在庫あり!約4週間程でお届け可能。
国内通販ショップに切替わりました。
発送に関して
決済方法
弊社をご利用いただく利点

全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。

安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。

レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。

決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。

ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。

email商品のお問い合わせ

商品の概要

camera_alt ※クリックしてメーカーサイトの写真を見る。

「日本語翻訳」

商品番号:01-045-5165-0

アドベンチャーを求める人とそのアドベンチャーGSのために、さらに優れたプロテクションを提供します。ステンレススチール製のTouratechクラッシュバーエクステンションは、オリジナルのR 1200 GSアドベンチャークラッシュバーではもはや十分ではないところをサポートします。これは思ったよりも早く起こる可能性があります。例えば、バイクがクラッシュバーを超えて転倒し、フェアリングの一部や繊細なアルミタンクにまで影響が及んだ場合などです。電解研磨された頑丈なステンレススチール製のクラッシュバーエクステンションは、お手入れが簡単で錆びにくいです。頑丈な電解研磨ステンレススチール製のクラッシュバーエクステンションは、お手入れが簡単で錆びにくいです。深い傷でも磨き上げることができます。

詳細: - デザイン、色、素材の点でオリジナルのクラッシュ・バーと正確に一致 - オリジナルのBMWエンジン・クラッシュ・バーにネジ止めされています - 力がフレーム全体に分散されるように配置されたメインのネジ接続ポイント - 安定性を高め、さらに安全性を高めるための追加のプロファイル加工されたステンレス・プレート - シリンダー・ヘッドと繊細なアルミニウム・タンクを損傷からよりよく保護 - 電解研磨されたステンレス・スチール製なので錆びにくい - 深い傷でも簡単に磨き上げることができます - 膝と脚のための無制限の自由 - 試され、テストされ、タフな毎日の旅行で証明された - 独自の生産と「Made in Germany」ノート。注:オリジナルのBMWエンジン・クラッシュ・バー用ステンレス・スチール補強ストラット、2013年製BMW R1200GS / 2014年製BMW R1200GSアドベンチャー(01-045-5164-0)との組み合わせはできません。クラッシュバーエクステンションのさらなる安定性は、クラッシュバーの2つの接続ポイントによって達成されます。取り付けに必要な部品はすべて付属しています。特別な工具は必要ありません。


「原文」
Article number: 01-045-5165-0

Even better protection for adventure seekers and their Adventure GS. The stainless steel Touratech crash bar extension can provide help where the original R 1200 GS Adventure crash bar no longer suffices. And this can happen quicker than one may think. For example, when the motorbike tips beyond the crash bar and parts of the fairing or even the sensitive aluminium tank are affected. This cannot only become expensive but put an abrupt end to a lovely tour as a worst scenario.The crash bar extension made of robust, electropolished stainless steel is easy to clean and rust-proof. The intelligent four-point screw connection distributes crash or impact forces over the frame, resulting in less damage. Even deep scratches can be polished up.

Details:- precisely matches the original crash bar in terms of design, colour and material- is screwed to the original BMW engine crash bar- main screw connection points positioned to ensure that forces are distributed across the frame- additional, profiled stainless steel plate for greater stability and even more safety- protects the cylinder head and the sensitive aluminium tank better against damage- made of electropolished stainless steel and is therefore rust-proof- even deep scratches can be polished up easily- unrestricted freedom for knees and legs- tried, tested and proven in tough daily travel- own production and "Made in Germany"Note: Cannot be combined with Stainless steel reinforcing strut for original BMW engine crash bar, BMW R1200GS from 2013 / BMW R1200GS Adventure from 2014 (01-045-5164-0)Additional information for installation: the Touratech crash bar extension is screwed to the main frame of the vehicle and the original crash bar at two points in order to distribute crash or impact forces better and to prevent severe damage to the vehicle. Additional stability of the crash bar extension is achieved by two further connection points on the crash bar. All parts necessary for installation are supplied. No special tools are required.

特徴

Categories / カテゴリー

モデルライン:
いいえ

Additional info

納期
:
メーカー在庫あり!約4週間程でお届け可能。

類似商品

プロモーション「割引中ブランド」