ショッピングカートには何も入っていません。
PROTECH / プロテック mounting stand front ,black | 890020
prt_890020
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
「日本語翻訳」
記事コード:890020
Dimension: 36 x 46 x 72 / 33 cm (height x width x depth) / jack up height
Material: powder-coated stainless steel
Finish: gray tinted
Thread:
M10x1,25 ca. 15 mm
Led:12V/1,8W
Homologation:EG-BE
Homologation number:[e13] 005046
PROTECH Universal マウンティングスタンド フロントは、優れたフロントコンペンセーターにより、追加アダプターなしで安全かつ簡単に前輪をジャッキアップすることができます。このマウントスタンドは、ほぼ全てのモーターサイクル(左右のスプリットトゥフットの高さが同じ)に対応しており、フォークホルムの下や後ろをガムテープで安全に掴むことができます。アプリケーションの幅は、刻み付きのネジで広い範囲で個別に調整できます。大きなダブルロールは、ジャッキアップとダウンのための堅さを提供しています。ファクタビリティーにより絶対的な省スペースを実現しています。修理やサービス作業、冬眠などに最適です。リアスタンド(PROTECH Universal mounting stand back, item no.890015など)と組み合わせて使用してください。<br
「原文」
Article code:890020
Dimension: 36 x 46 x 72 / 33 cm (height x width x depth) / jack up height
Material: powder-coated stainless steel
Finish: grey tinted
Thread: M10x1,25 ca. 15 mm
Led: 12V/1,8W
Homologation: EG-BE
Homologation number:[e13] 005046
The PROTECH Universal mounting stand front allows a safe and easy jack up of the front wheel without additional adapter by its brilliant front compensator. The mounting stand is suitable for nearly all motorcycles (with equal height of split-toe foot on both sides) and grasps with gummed rolls safely under and behing the fork holmes. The width of the applications is individually adjustable over a wide range by knurled screws. The big double rolls are providing firmness for jacking up and down. Absolutely space-saving due to factorability. Ideal for repair and service work or hibernation.Warning: Use only in connection with a rear stand (e.g. PROTECH Universal mounting stand back, item no. 890015).
記事コード:890020
Dimension: 36 x 46 x 72 / 33 cm (height x width x depth) / jack up height
Material: powder-coated stainless steel
Finish: gray tinted
Thread:
M10x1,25 ca. 15 mm
Led:12V/1,8W
Homologation:EG-BE
Homologation number:[e13] 005046
PROTECH Universal マウンティングスタンド フロントは、優れたフロントコンペンセーターにより、追加アダプターなしで安全かつ簡単に前輪をジャッキアップすることができます。このマウントスタンドは、ほぼ全てのモーターサイクル(左右のスプリットトゥフットの高さが同じ)に対応しており、フォークホルムの下や後ろをガムテープで安全に掴むことができます。アプリケーションの幅は、刻み付きのネジで広い範囲で個別に調整できます。大きなダブルロールは、ジャッキアップとダウンのための堅さを提供しています。ファクタビリティーにより絶対的な省スペースを実現しています。修理やサービス作業、冬眠などに最適です。リアスタンド(PROTECH Universal mounting stand back, item no.890015など)と組み合わせて使用してください。<br
「原文」
Article code:890020
Dimension: 36 x 46 x 72 / 33 cm (height x width x depth) / jack up height
Material: powder-coated stainless steel
Finish: grey tinted
Thread: M10x1,25 ca. 15 mm
Led: 12V/1,8W
Homologation: EG-BE
Homologation number:[e13] 005046
The PROTECH Universal mounting stand front allows a safe and easy jack up of the front wheel without additional adapter by its brilliant front compensator. The mounting stand is suitable for nearly all motorcycles (with equal height of split-toe foot on both sides) and grasps with gummed rolls safely under and behing the fork holmes. The width of the applications is individually adjustable over a wide range by knurled screws. The big double rolls are providing firmness for jacking up and down. Absolutely space-saving due to factorability. Ideal for repair and service work or hibernation.Warning: Use only in connection with a rear stand (e.g. PROTECH Universal mounting stand back, item no. 890015).