ショッピングカートには何も入っていません。
PROTECH / プロテック racing adapter M8 ,black | 890410
prt_890410
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
「日本語翻訳」
商品コード:890410
寸法:mm(高さ×幅)
材質:アルミニウム
仕上げ:黒く染めた(透明)
ねじ山。
M8
Led:12V/1,8W
Homologation:ABE
ホモロゲーション番号:[e13] 5047
重要な注意事項。キャタライザーなしでお届けします。
写真はBMW S 1000 Rに装着したものです。
PROTECHレーシングアダプターM8は、2アームウィングとM8スレッドのボビンにアクセス可能なモーターサイクルでPROTECHマウントスタンドバックを使用するために必要です。
チェーンガード付きリアハガー
装着準備完了(全てのパーツが揃っています。)
「原文」
Article code:890410
Dimension: mm (height x width)
Material: aluminium
Finish: black tinted (transparent)
Thread: M8
Led: 12V/1,8W
Homologation: ABE
Homologation number:[e13] 5047
Important Notes: Delivered without catalyser. Backfitting-catalyser Ø 60 mm item no. 65284051B (see accessories below).
Photo shows item on BMW S 1000 R.
The PROTECH racing adapter M8 are necessary for using the PROTECH mounting stand back on motorcycles with accessible two arm wing and bobbins with M8 thread. The racing adapter are clipped into the v-application points of the mounting stand to jack up the motorcycle.
Rear hugger with chain guard.
ready to mount (all parts supplied)
商品コード:890410
寸法:mm(高さ×幅)
材質:アルミニウム
仕上げ:黒く染めた(透明)
ねじ山。
M8
Led:12V/1,8W
Homologation:ABE
ホモロゲーション番号:[e13] 5047
重要な注意事項。キャタライザーなしでお届けします。
写真はBMW S 1000 Rに装着したものです。
PROTECHレーシングアダプターM8は、2アームウィングとM8スレッドのボビンにアクセス可能なモーターサイクルでPROTECHマウントスタンドバックを使用するために必要です。
チェーンガード付きリアハガー
装着準備完了(全てのパーツが揃っています。)
「原文」
Article code:890410
Dimension: mm (height x width)
Material: aluminium
Finish: black tinted (transparent)
Thread: M8
Led: 12V/1,8W
Homologation: ABE
Homologation number:[e13] 5047
Important Notes: Delivered without catalyser. Backfitting-catalyser Ø 60 mm item no. 65284051B (see accessories below).
Photo shows item on BMW S 1000 R.
The PROTECH racing adapter M8 are necessary for using the PROTECH mounting stand back on motorcycles with accessible two arm wing and bobbins with M8 thread. The racing adapter are clipped into the v-application points of the mounting stand to jack up the motorcycle.
Rear hugger with chain guard.
ready to mount (all parts supplied)