ショッピングカートには何も入っていません。
Access Design / アクセスデザイン Fender éliminator side for Harley-Davidson Low Rider S | SPLHD006
accde_SPLHD006
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
Article Number : SPLHD006
The side plate holder for Harley-Davidson Low S Rider S 114 is on the models from the year 2019 to 2020. It is designed in two elements to adjust its inclination.
It is placed on the flat surface of the hexagonal head of the wheel axle of the oscillating arm.
A threaded insert M8 neoprene is housed in the diameter of the wheel axle, the tightening of the plate support the insert will inflate.
The plate support is made of 3.mm thick steel to prevent vibrations.
The tab is attached to the chain guard attachment which will hold the side plate support.
The fastening system provides rigidity and absorbs all vibrations.
The plate support is coated with a high quality black epoxy paint.
It is supplied with CE standard LED plate lighting and heat shrink tubing to connect the lighting to your original wiring harness.
3 black covers are provided to hide the three mounting brackets of the original plate holder.
You have the option of either putting your plate lighting up or down in either case the license plate will cover all of your plate bracket.
All international license plates can be mounted on the side plate bracket.
The side plate holder for Harley-Davidson Low S Rider S 114 is on the models from the year 2019 to 2020. It is designed in two elements to adjust its inclination.
It is placed on the flat surface of the hexagonal head of the wheel axle of the oscillating arm.
A threaded insert M8 neoprene is housed in the diameter of the wheel axle, the tightening of the plate support the insert will inflate.
The plate support is made of 3.mm thick steel to prevent vibrations.
The tab is attached to the chain guard attachment which will hold the side plate support.
The fastening system provides rigidity and absorbs all vibrations.
The plate support is coated with a high quality black epoxy paint.
It is supplied with CE standard LED plate lighting and heat shrink tubing to connect the lighting to your original wiring harness.
3 black covers are provided to hide the three mounting brackets of the original plate holder.
You have the option of either putting your plate lighting up or down in either case the license plate will cover all of your plate bracket.
All international license plates can be mounted on the side plate bracket.