ショッピングカートには何も入っていません。
Access Design / アクセスデザイン Wheel base plate holder for Yamaha MT07 Tracer | SPLRY029
accde_SPLRY029
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
Article Number : SPLRY029
The “flush with the wheel” plate support brings a futuristic touch. It has been developed to keep the functions necessary for your vehicle.
-. The flush function.
-. The possibility of putting the indicators, a L.E.D plate lighting to European standards.
The ultra-reinforced fixing is made of 5.mm thick steel, reinforced with folds and a reinforcement to stiffen the entire plate support against vibrations. It is placed on the axle of the swingarm wheel and takes the place of your aluminum chock which serves as tension for your chain.
The arm part is made of 5.mm thick aluminum.
The functionality of the wheel base is made of aluminum, thickness 3mm. It has been bent to fit your tire, this avoids splashing the passenger and also the driver.
The location allows you to put the license plate as well as the direction indicators and L.E.D approved lighting or the rear brake light.
The shutter is positioned in place of the original plate support, to avoid any infiltration of particles.
The electrical harness is provided to connect your turn signals as well as the immatriuclation plate lighting.
With some original indicator, you can mount them on the wheel plate holder, it will be necessary to make a second hole on the wheel level.
The entire wheel plate holder and the shutter are coated with a matt black epoxy paint, resistant to weathering and impact from stones.
All French and international license plates are adaptable on the wheel plate holder.
The “flush with the wheel” plate support brings a futuristic touch. It has been developed to keep the functions necessary for your vehicle.
-. The flush function.
-. The possibility of putting the indicators, a L.E.D plate lighting to European standards.
The ultra-reinforced fixing is made of 5.mm thick steel, reinforced with folds and a reinforcement to stiffen the entire plate support against vibrations. It is placed on the axle of the swingarm wheel and takes the place of your aluminum chock which serves as tension for your chain.
The arm part is made of 5.mm thick aluminum.
The functionality of the wheel base is made of aluminum, thickness 3mm. It has been bent to fit your tire, this avoids splashing the passenger and also the driver.
The location allows you to put the license plate as well as the direction indicators and L.E.D approved lighting or the rear brake light.
The shutter is positioned in place of the original plate support, to avoid any infiltration of particles.
The electrical harness is provided to connect your turn signals as well as the immatriuclation plate lighting.
With some original indicator, you can mount them on the wheel plate holder, it will be necessary to make a second hole on the wheel level.
The entire wheel plate holder and the shutter are coated with a matt black epoxy paint, resistant to weathering and impact from stones.
All French and international license plates are adaptable on the wheel plate holder.