ショッピングカートには何も入っていません。
Extreme エクストリームコンポーネンツ フロントマッドガード BMW S1000RR / M1000RR (2019/2021) | CB1950
exco_CB1950
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
「日本語翻訳」
商品番号 : CB1950
エクストリームコンポーネンツは、BMW S1000RR / M1000RR (2019/2021)用の新しいツイルカーボンファイバーフロントマッドガードを発表します。
このパーツは、世界選手権のベストチーム(Estrella Galicia Monlau Competicion、Leopard Racing、Pons Racingなど)での経験を活かし、綾織りのプリプレグカーボンを使用してオートクレーブで加工されています。
この部品は、最大の軽さと耐性を保証するために、6バールの圧力で90度のオートクレーブで加工されます。
フロントマッドガードは、より多くの空気をキャリパーに送り込み、冷却効果を高めるために2つの特別なウィングを開発しました。
プラグ&プレイが可能です。
仕上げは光沢またはマット(ご要望に応じて)となりますが、追加料金がかかります。
レースでのみ使用可能
「原文」
Article Number : CB1950
Extreme Components is proud to present the new twill carbon fiber front mudguard for BMW S1000RR / M1000RR (2019/2021).
Thanks to the gained experience with the best Teams of the World Championship (such as Estrella Galicia Monlau Competicion, Leopard Racing, Pons Racing and many more) the part is worked in autoclave using pre-preg carbon, in twill weave.
This component is worked in autoclave at 90 degrees at 6 bar of pressure to guarantee the maximum lightness and resistance.
The front mudguard we developed two particular wings to direct more air to the calipers and augment the cooling.
Plug & play.
The finish can be glossy or matte (on request) with surcharge.
Only racing use
商品番号 : CB1950
エクストリームコンポーネンツは、BMW S1000RR / M1000RR (2019/2021)用の新しいツイルカーボンファイバーフロントマッドガードを発表します。
このパーツは、世界選手権のベストチーム(Estrella Galicia Monlau Competicion、Leopard Racing、Pons Racingなど)での経験を活かし、綾織りのプリプレグカーボンを使用してオートクレーブで加工されています。
この部品は、最大の軽さと耐性を保証するために、6バールの圧力で90度のオートクレーブで加工されます。
フロントマッドガードは、より多くの空気をキャリパーに送り込み、冷却効果を高めるために2つの特別なウィングを開発しました。
プラグ&プレイが可能です。
仕上げは光沢またはマット(ご要望に応じて)となりますが、追加料金がかかります。
レースでのみ使用可能
「原文」
Article Number : CB1950
Extreme Components is proud to present the new twill carbon fiber front mudguard for BMW S1000RR / M1000RR (2019/2021).
Thanks to the gained experience with the best Teams of the World Championship (such as Estrella Galicia Monlau Competicion, Leopard Racing, Pons Racing and many more) the part is worked in autoclave using pre-preg carbon, in twill weave.
This component is worked in autoclave at 90 degrees at 6 bar of pressure to guarantee the maximum lightness and resistance.
The front mudguard we developed two particular wings to direct more air to the calipers and augment the cooling.
Plug & play.
The finish can be glossy or matte (on request) with surcharge.
Only racing use
特徴
Categories / カテゴリー
タイプ:
カーボンファイバーフェアリング