ショッピングカートには何も入っていません。
PROTECH / プロテック mounting stand back ,black | 890015
prt_890015
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
「日本語翻訳」
記事コード:890015
Dimension:40 x 54 x 72 / 33 cm cm (高さ x 幅 x 奥行き) / ジャッキアップの高さ
素材: パウダーコーティングされたステンレススチール
仕上げ: グレーの着色
ねじ山。M10x1,25 ca. 15 mm
Led:12V/1,8W
Homologation:EG-BE
Homologation number:[e13] 005046
PROTECH Universal マウンティングスタンドバックは、後輪のジャッキアップを安全かつ簡単に行うことができ、アクセス可能な2アームウイングを持つほぼすべてのモーターサイクルに適しています。適用箇所の幅は、ローレットスクリューで広範囲に個別に調整できます。バイクによっては、ウイングの下にガム状のアプリケーションアングルを配置したり、マウンティングスタンドのV字型アプリケーションポイントにレーシングアダプターを挟み込んだりしてジャッキアップを行います(アングルとV字型アプリケーションは付属しています)。アダプターロール(ブービン)がまだ装着されていない場合は、追加で必要となり、アクセサリーとして入手できます。大きなダブルロールは、ジャッキアップやダウンの際にしっかりとした力を発揮します。ファクタビリティーを考慮した省スペース化を実現
「原文」
Article code:890015
Dimension: 40 x 54 x 72 / 33 cm cm (height x width x depth) / jack up height
Material: powder-coated stainless steel
Finish: grey tinted
Thread: M10x1,25 ca. 15 mm
Led: 12V/1,8W
Homologation: EG-BE
Homologation number:[e13] 005046
The PROTECH Universal mounting stand back allows a safe and easy jack up of the rear wheel and is suitable for nearly all motorcycles with accessible two arm wing. The width of the application points is individually adjustable over a wide range by knurled screws. Depending on the motorcycle the jack up works by stationing gummed application angles under the wing or clipping in racing adapter in the V-application points of the mounting stand (angle and V-application included). If there aren`t adapter roll (boobins) mounted yet, they are needed additionally and are available as accessory. The big double rolls are providing firmness for jacking up and down. Absolutely space-saving due to factorability
記事コード:890015
Dimension:40 x 54 x 72 / 33 cm cm (高さ x 幅 x 奥行き) / ジャッキアップの高さ
素材: パウダーコーティングされたステンレススチール
仕上げ: グレーの着色
ねじ山。M10x1,25 ca. 15 mm
Led:12V/1,8W
Homologation:EG-BE
Homologation number:[e13] 005046
PROTECH Universal マウンティングスタンドバックは、後輪のジャッキアップを安全かつ簡単に行うことができ、アクセス可能な2アームウイングを持つほぼすべてのモーターサイクルに適しています。適用箇所の幅は、ローレットスクリューで広範囲に個別に調整できます。バイクによっては、ウイングの下にガム状のアプリケーションアングルを配置したり、マウンティングスタンドのV字型アプリケーションポイントにレーシングアダプターを挟み込んだりしてジャッキアップを行います(アングルとV字型アプリケーションは付属しています)。アダプターロール(ブービン)がまだ装着されていない場合は、追加で必要となり、アクセサリーとして入手できます。大きなダブルロールは、ジャッキアップやダウンの際にしっかりとした力を発揮します。ファクタビリティーを考慮した省スペース化を実現
「原文」
Article code:890015
Dimension: 40 x 54 x 72 / 33 cm cm (height x width x depth) / jack up height
Material: powder-coated stainless steel
Finish: grey tinted
Thread: M10x1,25 ca. 15 mm
Led: 12V/1,8W
Homologation: EG-BE
Homologation number:[e13] 005046
The PROTECH Universal mounting stand back allows a safe and easy jack up of the rear wheel and is suitable for nearly all motorcycles with accessible two arm wing. The width of the application points is individually adjustable over a wide range by knurled screws. Depending on the motorcycle the jack up works by stationing gummed application angles under the wing or clipping in racing adapter in the V-application points of the mounting stand (angle and V-application included). If there aren`t adapter roll (boobins) mounted yet, they are needed additionally and are available as accessory. The big double rolls are providing firmness for jacking up and down. Absolutely space-saving due to factorability