ショッピングカートには何も入っていません。
R&G(アールアンドジー) バーエンドスライダー タイガー900 Tiger900 GT/Rally (20-) ブラック 左右セット 純正ハンドガード対応 RG-BE0139BK
rg_BE0139BK
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
※クリックしてメーカーサイトの写真を見る。
「日本語翻訳」
商品番号 : BE0139BK
カラー : ブラック
数量 : ペア
取り付け難易度 (1-5) : 1 - 簡単
取り付け時間 : 1分
Triumph Tiger 900 GT/ Rally 20- and Triumph Scrambler 1200 XE 19- (with ハンドガード) (BE0139BK)
RandG バーエンドスライダーは、Triumph Tiger 900 GT/ Rally 20- and Triumph Scrambler 1200 XE 19- (with ハンドガード)モデル用に特別に設計・開発されました。
高価なレバーやクリップオンの保護に役立ちます。
「原文」
Article Number : BE0139BK
Colour : Black
Quantity : Pair
Fitting Difficulty (1-5) : 1 - Easy
Fitting Time : 1 Minute
Bar End Sliders for the Triumph Tiger 900 GT/ Rally '20- & Triumph Scrambler 1200 XE '19- (with handguards) (BE0139BK)
R&G Bar End Sliders have been specially designed and developed for the Triumph Tiger 900 GT/ Rally '20- & Triumph Scrambler 1200 XE '19- (with handguards) models.
Helping to protect expensive levers and clip-ons from damage in the event of a drop, crash or slide.
Easy to install, they simply screw in-place of the OE bar ends, taking only seconds.
「日本語翻訳」
商品番号 : BE0139BK
カラー : ブラック
数量 : ペア
取り付け難易度 (1-5) : 1 - 簡単
取り付け時間 : 1分
Triumph Tiger 900 GT/ Rally 20- and Triumph Scrambler 1200 XE 19- (with ハンドガード) (BE0139BK)
RandG バーエンドスライダーは、Triumph Tiger 900 GT/ Rally 20- and Triumph Scrambler 1200 XE 19- (with ハンドガード)モデル用に特別に設計・開発されました。
高価なレバーやクリップオンの保護に役立ちます。
「原文」
Article Number : BE0139BK
Colour : Black
Quantity : Pair
Fitting Difficulty (1-5) : 1 - Easy
Fitting Time : 1 Minute
Bar End Sliders for the Triumph Tiger 900 GT/ Rally '20- & Triumph Scrambler 1200 XE '19- (with handguards) (BE0139BK)
R&G Bar End Sliders have been specially designed and developed for the Triumph Tiger 900 GT/ Rally '20- & Triumph Scrambler 1200 XE '19- (with handguards) models.
Helping to protect expensive levers and clip-ons from damage in the event of a drop, crash or slide.
Easy to install, they simply screw in-place of the OE bar ends, taking only seconds.