ショッピングカートには何も入っていません。
R&G (アールアンドジー) カーボン エンジンケーススライダー - KTM Super Duke LC8 | ECS0010CG
rg_ECS0010CG
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
※クリックしてメーカーサイトの写真を見る。
「日本語翻訳」
商品番号 : ECS0010CG
カラー : なし
数量 : シングル
材質 : カーボンケブラー
装着難易度(1-5) :装着時間 :
KTMスーパーデュークLC8用カーボンファイバーエンジンケーススライダー (ECS0010CG)
RandGクラッシュプロテクターを装着していても、エンジンケースは破損の危険性があります。 KTM 990スーパーデュークLC8、950/990アドベンチャー、950/990SM、990SMT、990SMRモデル用のエンジンケーススライダーは、DuPonで強化されたカーボンで作られています。
「原文」
Article Number : ECS0010CG
Colour : Not Applicable
Quantity : Single
Material : Carbon Kevlar
Fitting Difficulty (1-5) : Fitting Time:
Carbon Fibre Engine Case Slider for KTM Super Duke LC8 (ECS0010CG)
Even if you have R&G crash protectors fitted to you bike, your engine cases are still at risk of damage. This engine case slider for the KTM 990 Super Duke LC8, 950/990 Adventure, 950/990SM, 990SMT, 990SMR models is made from Carbon reinforced with DuPont™ Kevlar® and fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop. Fitted with silicon (provided with the kit) for secure adhesion. The engine case slider can be removed if required. Fits right hand side only (left hand side available - see related products below). R&G Racing engine case sliders complement the R&G Racing crash protectors and the additional range of products that we offer for these bikes. Note: When removing the engine case slider it is possible that some residue will be left on the casing but this is easily removed with a little work.
「日本語翻訳」
商品番号 : ECS0010CG
カラー : なし
数量 : シングル
材質 : カーボンケブラー
装着難易度(1-5) :装着時間 :
KTMスーパーデュークLC8用カーボンファイバーエンジンケーススライダー (ECS0010CG)
RandGクラッシュプロテクターを装着していても、エンジンケースは破損の危険性があります。 KTM 990スーパーデュークLC8、950/990アドベンチャー、950/990SM、990SMT、990SMRモデル用のエンジンケーススライダーは、DuPonで強化されたカーボンで作られています。
「原文」
Article Number : ECS0010CG
Colour : Not Applicable
Quantity : Single
Material : Carbon Kevlar
Fitting Difficulty (1-5) : Fitting Time:
Carbon Fibre Engine Case Slider for KTM Super Duke LC8 (ECS0010CG)
Even if you have R&G crash protectors fitted to you bike, your engine cases are still at risk of damage. This engine case slider for the KTM 990 Super Duke LC8, 950/990 Adventure, 950/990SM, 990SMT, 990SMR models is made from Carbon reinforced with DuPont™ Kevlar® and fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop. Fitted with silicon (provided with the kit) for secure adhesion. The engine case slider can be removed if required. Fits right hand side only (left hand side available - see related products below). R&G Racing engine case sliders complement the R&G Racing crash protectors and the additional range of products that we offer for these bikes. Note: When removing the engine case slider it is possible that some residue will be left on the casing but this is easily removed with a little work.