ショッピングカートには何も入っていません。
TOURATECH / ツラーテック Progressive fork springs for SUZUKI DL 650/V-Strom 650, 2004 - 2015 | 01-040-7421
tt_01-040-7421-0

発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
※クリックしてメーカーサイトの写真を見る。
「日本語翻訳」
商品番号:01-040-7421-0
スズキDL650/V-Strom650/XTのフォークスプリングに最適なスプリングです。これらのスプリングは、バイクのツーリングに適しています。また、極端な状況下でのレスポンスが大幅に改善され、より大きなリザーブが得られます。交換用スプリングは、オランダのサスペンションスペシャリストHyperpro社がヨーロッパで製造しています。
すべてのサスペンションソリューションと同様に、バイクのリアとフロントを一緒に変更する必要があります。⇒1つのコンポーネントだけを変更すると、最適なハンドリングが得られません。
「原文」
Article number: 01-040-7421-0
These progressive replacement springs are a perfect match for the fork springs on the Suzuki DL650 / V-Strom 650/XT. They make the fork springs better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The replacement springs are made in Europe by Dutch suspension specialists Hyperpro.
As with all suspension solutions, the rear and front of the motorbike should be modified together.=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.
「日本語翻訳」
商品番号:01-040-7421-0
スズキDL650/V-Strom650/XTのフォークスプリングに最適なスプリングです。これらのスプリングは、バイクのツーリングに適しています。また、極端な状況下でのレスポンスが大幅に改善され、より大きなリザーブが得られます。交換用スプリングは、オランダのサスペンションスペシャリストHyperpro社がヨーロッパで製造しています。
すべてのサスペンションソリューションと同様に、バイクのリアとフロントを一緒に変更する必要があります。⇒1つのコンポーネントだけを変更すると、最適なハンドリングが得られません。
「原文」
Article number: 01-040-7421-0
These progressive replacement springs are a perfect match for the fork springs on the Suzuki DL650 / V-Strom 650/XT. They make the fork springs better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The replacement springs are made in Europe by Dutch suspension specialists Hyperpro.
As with all suspension solutions, the rear and front of the motorbike should be modified together.=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.