ショッピングカートには何も入っていません。
Wunderkind (ワンダーカインド) フォワードコントロールフットレストセット Triumph ブラック | 106503-F15
wuk_106503-F15
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
「日本語翻訳」
記事番号:106503-F15
フォワードコントロール Triumph Bobberモデル
フットレストとレバーは3段階で調整可能です。
このように、オリジナルのフットレストシステムとは対照的に、足の位置は前方に約140、155、170 mm変化します。
ブレーキペダルの角度とギアレバーの角度は、何段階にも設定可能です。
腰掛けは振動を軽減し、水に濡れても足が滑らないように粘着性のあるゴム製です。 フットレストは「クラウン」と呼ばれるシェープなデザインで作られています。スイスのお客様へのご注意:スイス向けのフォワードコントロールは、国別DTCホモロゲーションペーパーを使用して、当社の販売パートナーであるF. and W. Arni AGに直接ご注文ください。
「原文」
Article Number: 106503-F15
Forward controls Triumph Bobber models
The footrests and levers are adjustable in 3 steps.
Thus, in contrast to the original footrest system, the position of the feet changes approx. about 140, 155 or 170 mm to the front.
The angle of the brake pedal, as well as the angle of the gear lever, is settable in many steps.
The rests reduce vibrations and are made of sticky rubber so that the feet do not slip in case of wetness.
Footrests are created in the shapely design called 'Crown'.
All parts are CNC-milled and surfaced by house-made anodized layer BLACKPearl.
Includes part certification.
Note for Swiss customers: Forward controls for Switzerland with country-specific DTC homologation paper should be ordered directly from our sales partner F. & W. Arni AG | arni-harley.ch.
記事番号:106503-F15
フォワードコントロール Triumph Bobberモデル
フットレストとレバーは3段階で調整可能です。
このように、オリジナルのフットレストシステムとは対照的に、足の位置は前方に約140、155、170 mm変化します。
ブレーキペダルの角度とギアレバーの角度は、何段階にも設定可能です。
腰掛けは振動を軽減し、水に濡れても足が滑らないように粘着性のあるゴム製です。 フットレストは「クラウン」と呼ばれるシェープなデザインで作られています。スイスのお客様へのご注意:スイス向けのフォワードコントロールは、国別DTCホモロゲーションペーパーを使用して、当社の販売パートナーであるF. and W. Arni AGに直接ご注文ください。
「原文」
Article Number: 106503-F15
Forward controls Triumph Bobber models
The footrests and levers are adjustable in 3 steps.
Thus, in contrast to the original footrest system, the position of the feet changes approx. about 140, 155 or 170 mm to the front.
The angle of the brake pedal, as well as the angle of the gear lever, is settable in many steps.
The rests reduce vibrations and are made of sticky rubber so that the feet do not slip in case of wetness.
Footrests are created in the shapely design called 'Crown'.
All parts are CNC-milled and surfaced by house-made anodized layer BLACKPearl.
Includes part certification.
Note for Swiss customers: Forward controls for Switzerland with country-specific DTC homologation paper should be ordered directly from our sales partner F. & W. Arni AG | arni-harley.ch.