ショッピングカートには何も入っていません。
Wunderkind (ワンダーカインド) リアホイール用メタルフェンダー インジケータ/テールライト&フィッティングパーツ付き ブラック| 106735-F26
wuk_106735-F26
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
「日本語翻訳」
記事番号:106735-F26
インジケーターとテールライトの組み合わせを含む後輪用バイクフェンダー
構成:
頑丈な鋼板製の短めで無塗装のリアマッドガード、取付材付き。
再構築の特徴: リアフェンダーの固定は、ロッカーの取り付け位置で行うことができます。 インジケーター/テールライトのケーブルは、ストラットの内側からスイングアームまで目に見えないようになっています。 サイドナンバープレートホルダーとの組み合わせでのみ、理想的にはWUNDERKIND-Customのものを使用します。米国モデルには適していません。
「原文」
Article Number: 106735-F26
Motorbike fender for the rear-wheel incl. indicator/taillight combination
Consisting of:
Shortened, unpainted rear mudguard made of sturdy sheet steel, incl. mounting material.
Two three-dimensional shaped holding struts for fixing the mudguard, shiny black plastic-coated.
3D milled housing at the ends of the struts with integrated LED flashing and taillights.
Mounting material.
Features of the reconstruction:
The fixing of the rear fender can be done at given mounting points of the rocker.
The cables for the indicators/taillights are invisibly run inside of the struts to the swingarm.
Only in combination with a side license plate holder, ideally with the one of WUNDERKIND-Custom.
Note: Due to the special subject matter of modern Can-Bus systems, we recommend installing the parts in a specialist workshop.
Parts are only suitable on models produced for the European market. Not suitable for US models!
記事番号:106735-F26
インジケーターとテールライトの組み合わせを含む後輪用バイクフェンダー
構成:
頑丈な鋼板製の短めで無塗装のリアマッドガード、取付材付き。
再構築の特徴: リアフェンダーの固定は、ロッカーの取り付け位置で行うことができます。 インジケーター/テールライトのケーブルは、ストラットの内側からスイングアームまで目に見えないようになっています。 サイドナンバープレートホルダーとの組み合わせでのみ、理想的にはWUNDERKIND-Customのものを使用します。米国モデルには適していません。
「原文」
Article Number: 106735-F26
Motorbike fender for the rear-wheel incl. indicator/taillight combination
Consisting of:
Shortened, unpainted rear mudguard made of sturdy sheet steel, incl. mounting material.
Two three-dimensional shaped holding struts for fixing the mudguard, shiny black plastic-coated.
3D milled housing at the ends of the struts with integrated LED flashing and taillights.
Mounting material.
Features of the reconstruction:
The fixing of the rear fender can be done at given mounting points of the rocker.
The cables for the indicators/taillights are invisibly run inside of the struts to the swingarm.
Only in combination with a side license plate holder, ideally with the one of WUNDERKIND-Custom.
Note: Due to the special subject matter of modern Can-Bus systems, we recommend installing the parts in a specialist workshop.
Parts are only suitable on models produced for the European market. Not suitable for US models!