ショッピングカートには何も入っていません。
Yoshimura / ヨシムラ USA KTM/Husq 250/350 19-22 RS-4 Stainless Slip-On Exhaust, W/ Aluminum Muffler | 262532D320
yos_262532D320

発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
Article Code: 262532D320
EAN: 0840025907669
Brand new from KTM and Husqvarna for 2019 are re-vamped 250 SX-F / FC250 and SX-F 350 / FC350.
Both the 250 and 350 make good HP and torque in stock form, but nevertheless we went to work to improve power in every RPM range on these twin race machines and the gains we were able to attain with our RS-4 are quite impressive.
We wound up with the 250 peak HP at 6.6% and a big gain of peak torque of 14.2% The 350 was even more impressive with a peak HP gain of 10.2% and peak torque gain of 7%. The work horse for much of this performance is our RS-4 muffler. With its Poly-resonant Duplex front chamber to add overall volume, and the special stepped two-stage baffle configuration that reduces sound without restricting performance. These Austrian 250 and 350 race machines are ready for the top of the podium now! Spark arrester available separately.
If you're serious - it's only Yoshimura. Proudly made in the USA!
Pentagonal-shaped sleeve
Front muffler cap functions as a poly-resonant chamber which helps reduce noise
Two-stage stepped baffle
Carbon fiber end-cap
Stainless Steel Tail-pipe
Repack Kits, optional Inserts and Spark Arresters are available for all models
EAN: 0840025907669
Brand new from KTM and Husqvarna for 2019 are re-vamped 250 SX-F / FC250 and SX-F 350 / FC350.
Both the 250 and 350 make good HP and torque in stock form, but nevertheless we went to work to improve power in every RPM range on these twin race machines and the gains we were able to attain with our RS-4 are quite impressive.
We wound up with the 250 peak HP at 6.6% and a big gain of peak torque of 14.2% The 350 was even more impressive with a peak HP gain of 10.2% and peak torque gain of 7%. The work horse for much of this performance is our RS-4 muffler. With its Poly-resonant Duplex front chamber to add overall volume, and the special stepped two-stage baffle configuration that reduces sound without restricting performance. These Austrian 250 and 350 race machines are ready for the top of the podium now! Spark arrester available separately.
If you're serious - it's only Yoshimura. Proudly made in the USA!
Pentagonal-shaped sleeve
Front muffler cap functions as a poly-resonant chamber which helps reduce noise
Two-stage stepped baffle
Carbon fiber end-cap
Stainless Steel Tail-pipe
Repack Kits, optional Inserts and Spark Arresters are available for all models