ヨーロッパのバイク用品専門店「ユーロネットダイレクト」!ネットショップを通しオートバイ部品パーツを現地価格で発送中!
 割引中の商品はこちら!  在庫一掃セール中!  BMW純正カー用品はこちら!BMW純正カー用品・車アクセサリーEuronetdirect バイク用アパレルならユーロネットダイレクトバイク用品通販店バイク用ブーツ、シューズならユーロネットダイレクトバイク用品通販店ヘルメットならユーロネットダイレクトバイク用品通販店

 お客様の声☆  Eng./中文  車種別検索ページへジャンプ-ユーロネットダイレクトバイク用品通販店

Altrider / アルトライダー Skid Plate for the BMW R 1200 GS Water Cooled - Black - With BMW Crash Bars Installed | R116-2-1203

alt_R116-2-1203
アルトライダーカスタムパーツ割引中!
このプロモーション終了まであと:
48,900 
46,944 
(税込み)
この金額が割引されます。➡: 1,956 円 (4%)
+
送料の再計算をする。
1 個(カートも含めた商品の合計数)

適合車種:
BMW
R 1200 GS (2003-2012)

国内通販ショップに切替わりました。
発送に関して
決済方法
弊社をご利用いただく利点

全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。

安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。

レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。

決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。

ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。

email商品のお問い合わせ

商品の概要

「日本語翻訳」
品番:注文は水のクラッシュバーやスキッドプレートは125馬力とここ
つの完全なシステムとして一緒にR 1200 GSを冷却R116-2-1203

、新しい水ボクサーモータであります印象的なマシン。すべてのその力はトレイルがAltRiderクラッシュバーと同様に、AltRiderスキッドプレートが完全に液体のために再設計されました/> 1ピースがプレートスキッドインストールするには、非常に強力かつシンプルな残りはインストールが簡単で、かつすべてのステンレス製のハードウェアが
AltRiderオートバイアクセサリーを提供している間、このマウントシステムは、非常にきれいな外観を提供し、業界初であります/> 3/16インチ(4.76ミリメートル)手
オイル変化 R 1200(スポーツサスペンションを含む)GSラリーに対応特許出願中
に利用可能/> レムスに対応ヘッダ





「原文」
Part number: R116-2-1203

Order the Crash Bars and Skid Plate for the water cooled R 1200 GS together as one complete system here
With 125 horsepower, the new water boxer motor is an impressive machine. All that power flying down the trail can produce some tough hits to the bottom of a 500 pound motorcycle, requiring much heftier protection than the thin stock plate
Like the AltRider crash bars, the AltRider skid plate was completely redesigned for the liquid cooled R 1200 GS. To maintain greater ground clearance, a flat plate of 3/16 inch (4.76 mm) anodized aluminum is utilized, with no bolts on the bottom side to snag. This patent pending mounting system allows the move from the AltRider original corrugated design, saving over 1 inch of ground clearance. The plate was designed to be extremely narrow at the bottom to maintain the great cornering ability of the bike. It is a one piece unit that provides tire to tire protection. From the leading front corner of the headers to just before the rear tire, the entire bottom side of the motor is shielded from impact. Even the catalytic converter is safeguarded. There are no gaps in protection or plastic pieces to break and no parts to continually repurchase--just one smooth 3/16 inch (4.76 mm) plate that provides complete coverage. In an effort to maintain simplicity, AltRider designed the skid plate so it doesn't require removal to change the oil on the bike
The AltRider skid plate is the only design on the market that doesn't rely on the engine as a mounting point. The inherent weakness of all other current designs is that they use the motor itself as an anchor point. No matter the number or complexity of brackets, they still transfer impact directly to the motor. The front of the AltRider plate gets its brute strength from 3/16 inch (4.76 mm) stainless steel brackets that mount directly to the frame. The brackets are secured with the two sturdy M12 torx frame bolts, preventing the flange from pivoting on impact. Another key innovation of the AltRider design are the rear mounting points. Other plates attach to the frame cross member below the swing arm using thin or complicated brackets. These long brackets have more leverage, allowing impacts to create shearing or bending forces that break the mount. The AltRider skid plate is held in place with two custom machined fasteners that replace the center stand pins, lowering the mounting point by a notable 4 inches (101.6 mm) which dramatically reduces leverage. This mounting system is an industry first that provides an extremely clean look, while remaining very powerful and simple to install
The one piece skid plate is simple to install, and all stainless steel hardware is provided
AltRider motorcycle accessories are 100% designed and manufactured in the USA
3/16 inch (4.76 mm) hand TIG welded anodized aluminum
Protects entire bottom side of the liquid cooled motor including headers and catalytic converter
Oil change does not require removal of skid plate
One piece unit that provides tire to tire protection
Available in silver and black
Patent pending
Compatible with R 1200 GS Rallye (including Sport Suspension) and Exclusive models
Compatible with Remus header


特徴

類似商品

プロモーション「割引中ブランド」