ショッピングカートには何も入っていません。
Altrider / アルトライダー RotopaX L Bracket | ROTO-1-7113
alt_ROTO-1-7113
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
「日本語翻訳」
品番:ROTO-1から7113
ヘビーデューティー、パウダーコーティングされたスチール製のL型ブラケット
独創的なPAXは、デザインはあなたが私たちのコンテナのいずれかにマウント任意のPAXを使用することができますマウント。 PAXマウントはすべて硬化陽極酸化アルミニウムおよびB7の最大強度のために、すべてのスレッドを作られています
注:PAXを締め過ぎするかわからないことが、容器がぴったりになるまでマウント締め、コンテナを粉砕する必要はありませんマウント。
8ゲージ(0.172インチ)の鋼すべてRotopaXガソリンに対応/>
スタックRotopaXに対応/>
高さ)ロックパックマウントにはお勧めしません - 11インチ(27.94センチメートル)
幅 - 6インチ(15.24センチメートル)
深さ - 間隔は5インチ(12.7 cm)
「原文」
Part number: ROTO-1-7113
Heavy-duty, powder coated steel L-Bracket.
The ingenious pax mount design enables you to use any pax mount with any of our containers. The pax mounts are all made of hardened anodized aluminum and B7 all thread for maximum strength.
Note: be sure not to overtighten the pax mount there is no need to crush the container, tighten the mount until the container is snug.
8 gauge (.172 inch) steel
Compatible with all RotopaX Gasoline, Water and Storage packs
Compatible with all RotopaX Pack Mounts
Stack RotopaX with the use of a Mount Extension (not recommended for Locking pack mounts)
Height - 11 inches (27.94 cm)
Width - 6 inches (15.24 cm)
Depth - 5 inches (12.7 cm)
品番:ROTO-1から7113
ヘビーデューティー、パウダーコーティングされたスチール製のL型ブラケット
独創的なPAXは、デザインはあなたが私たちのコンテナのいずれかにマウント任意のPAXを使用することができますマウント。 PAXマウントはすべて硬化陽極酸化アルミニウムおよびB7の最大強度のために、すべてのスレッドを作られています
注:PAXを締め過ぎするかわからないことが、容器がぴったりになるまでマウント締め、コンテナを粉砕する必要はありませんマウント。
8ゲージ(0.172インチ)の鋼すべてRotopaXガソリンに対応/>
スタックRotopaXに対応/>
高さ)ロックパックマウントにはお勧めしません - 11インチ(27.94センチメートル)
幅 - 6インチ(15.24センチメートル)
深さ - 間隔は5インチ(12.7 cm)
「原文」
Part number: ROTO-1-7113
Heavy-duty, powder coated steel L-Bracket.
The ingenious pax mount design enables you to use any pax mount with any of our containers. The pax mounts are all made of hardened anodized aluminum and B7 all thread for maximum strength.
Note: be sure not to overtighten the pax mount there is no need to crush the container, tighten the mount until the container is snug.
8 gauge (.172 inch) steel
Compatible with all RotopaX Gasoline, Water and Storage packs
Compatible with all RotopaX Pack Mounts
Stack RotopaX with the use of a Mount Extension (not recommended for Locking pack mounts)
Height - 11 inches (27.94 cm)
Width - 6 inches (15.24 cm)
Depth - 5 inches (12.7 cm)