ショッピングカートには何も入っていません。
Motogadget / モトガジェット モトスコーププロ ブレークアウトボックス J1850 H-D Sportster XL Molex | 1003115
motogad_1003115
発送に関して
決済方法
弊社をご利用いただく利点
全てユーロッパの一流メーカーバイク用品!弊社は欧州の有名ブランド商品のみ地元業者、メーカーより直接お取り寄せしております。
安心の商品検品、追跡番号ご案内メール弊社スタッフが発送前に検品と梱包をしっかりと行っております。発送後には追跡番号もメールでお送りしています。
レア、国内在庫無しでも 1点からお取り寄せ可能。日本では珍しいレア商品や国内在庫が無い商品でも一点からお取り寄せ可能です。その場合は他の業者様に発注するよりも早く入荷出来ます。
決済方法当サイトではVISA、マスターカード、ペイパル、及び口座振り込みは(三井住友・ジャパンネット銀行)にして頂けます。
ベストプライス当サイトはヨーロッパでのリテール価格を参考に商品販売させて頂いております。欧州のディストリビューター、メーカーから直接お取りしております。
email商品のお問い合わせ
商品の概要
「日本語翻訳」
記事番号:1003115
ハーレーダビッドソンのためのブレイクアウトボックスJ1850は、(右側のモデル選択を参照してください)motoscopeプロデジタルバス(SAE J1850)が装備されているスポーツスター(XL)のモデルと互換性を作る
あなたのモデルを選択します。あなたはバスアダプタとあなたの車のための正しいコネクターを受け取ることになります。
このコネクタのみブレイクアウトボックスのネジ端子に接続する必要があります。 motoscopeプロの接続ケーブルは、ブレイクアウトボックスに接続されています。そして、コネクタは、元のハーネスとmotoscope Proの作品に差し込まれています。それは簡単なことではありません。このブレイクアウトボックスJ1850はすべてHD 2004からスポーツスターとMOLEXコネクタに適している
注意:このブレイクアウトボックスJ1850は新しいバス「HD LAN」を搭載したモデルには適していません
あなたは!ここでも当社の他の機器を接続することはできません。このため、M-CAN J1850を使用
配達の範囲:。ブレイクアウトボックスJ1850ケーブル固定用の32個の接続端子、接続プラグ(機種固有)、2×M3固定ねじ、32のワイヤ端スリーブ、プラスチック板とそして、ストレインリリーフ、2つのケーブルties.Specificationsとコネクタなし
外形寸法
長さ/幅/高さを特長:コネクタとケーブルと42ミリメートル/ 42ミリメートル/ 26.5ミリメートルの
重量:約。 80グラム
コネクタ: - スピード
- スピード
- MIL制御ランプ(エンジン警告を確認してください)
- インジケーターランプ
- ハイビーム制御異なるが、モデルによっては、2本のM3と
添付ファイルが
ボルト
関数をスレッドの写真を見ますランプ
- オイルの圧力
制御ランプ - タンク予備制御ランプ(存在する場合)
- 制御ランプ
次のONアラームは使用できません:
- ABS
制御ランプ(存在する場合)
- 6速制御ランプ(もし現在) - 充電制御ランプ(存在する場合) - 燃料
ゲージ(存在する場合)
「原文」
Article No: 1003115$$The breakout box J1850 for Harley Davidson makes the motoscope pro compatible with the Sportster (XL) models that are equipped with the digital bus (SAE J1850) (see model selection on the right).$$Select your model and you will receive the bus adapter and the correct connector for your vehicle.$This connector only needs to be connected to the screw terminals of the breakout box. The connection cables of the motoscope pro are also connected to the breakout box. Then the connector is plugged into the original wiring harness and the motoscope Pro works. It couldn't be easier.$$This Breakout Box J1850 is suitable for all HD Sportster from 2004 and MOLEX connectors.$$$ATTENTION: This Breakout Box J1850 is not suitable for models with the new bus 'HD LAN'!$You cannot connect our other instruments here either. Use the m-CAN J1850 for this.$$ $$Scope of delivery: Breakout Box J1850 with 32 connection terminals, a connection plug (model-specific), 2 x M3 fastening screws, 32 wire end sleeves, plastic plate for cable fastening and strain relief, two cable ties.Specifications and Features$Dimensions$$Length / width / height without connector: 42 mm / 42 mm / 26.5 mm$Weight with connector and cable: approx. 80 g$Connector: different depending on the model, see photos$Attachment with two M3 threaded bolts$$Function$$- speed$- speed$$- MIL control lamp (Check Engine Warning)$- Indicator lamp$- High beam control lamp$- Oil pressure$control lamp - Tank reserve control lamp (if present)$- Alarm ON control lamp$$The following are not available:$$- ABS$control lamp (if present)$- 6th gear control lamp (if present) - Charge control lamp (if present) - Fuel$gauge (if present)
記事番号:1003115
ハーレーダビッドソンのためのブレイクアウトボックスJ1850は、(右側のモデル選択を参照してください)motoscopeプロデジタルバス(SAE J1850)が装備されているスポーツスター(XL)のモデルと互換性を作る
あなたのモデルを選択します。あなたはバスアダプタとあなたの車のための正しいコネクターを受け取ることになります。
このコネクタのみブレイクアウトボックスのネジ端子に接続する必要があります。 motoscopeプロの接続ケーブルは、ブレイクアウトボックスに接続されています。そして、コネクタは、元のハーネスとmotoscope Proの作品に差し込まれています。それは簡単なことではありません。このブレイクアウトボックスJ1850はすべてHD 2004からスポーツスターとMOLEXコネクタに適している
注意:このブレイクアウトボックスJ1850は新しいバス「HD LAN」を搭載したモデルには適していません
あなたは!ここでも当社の他の機器を接続することはできません。このため、M-CAN J1850を使用
配達の範囲:。ブレイクアウトボックスJ1850ケーブル固定用の32個の接続端子、接続プラグ(機種固有)、2×M3固定ねじ、32のワイヤ端スリーブ、プラスチック板とそして、ストレインリリーフ、2つのケーブルties.Specificationsとコネクタなし
外形寸法
長さ/幅/高さを特長:コネクタとケーブルと42ミリメートル/ 42ミリメートル/ 26.5ミリメートルの
重量:約。 80グラム
コネクタ: - スピード
- スピード
- MIL制御ランプ(エンジン警告を確認してください)
- インジケーターランプ
- ハイビーム制御異なるが、モデルによっては、2本のM3と
添付ファイルが
ボルト
関数をスレッドの写真を見ますランプ
- オイルの圧力
制御ランプ - タンク予備制御ランプ(存在する場合)
- 制御ランプ
次のONアラームは使用できません:
- ABS
制御ランプ(存在する場合)
- 6速制御ランプ(もし現在) - 充電制御ランプ(存在する場合) - 燃料
ゲージ(存在する場合)
「原文」
Article No: 1003115$$The breakout box J1850 for Harley Davidson makes the motoscope pro compatible with the Sportster (XL) models that are equipped with the digital bus (SAE J1850) (see model selection on the right).$$Select your model and you will receive the bus adapter and the correct connector for your vehicle.$This connector only needs to be connected to the screw terminals of the breakout box. The connection cables of the motoscope pro are also connected to the breakout box. Then the connector is plugged into the original wiring harness and the motoscope Pro works. It couldn't be easier.$$This Breakout Box J1850 is suitable for all HD Sportster from 2004 and MOLEX connectors.$$$ATTENTION: This Breakout Box J1850 is not suitable for models with the new bus 'HD LAN'!$You cannot connect our other instruments here either. Use the m-CAN J1850 for this.$$ $$Scope of delivery: Breakout Box J1850 with 32 connection terminals, a connection plug (model-specific), 2 x M3 fastening screws, 32 wire end sleeves, plastic plate for cable fastening and strain relief, two cable ties.Specifications and Features$Dimensions$$Length / width / height without connector: 42 mm / 42 mm / 26.5 mm$Weight with connector and cable: approx. 80 g$Connector: different depending on the model, see photos$Attachment with two M3 threaded bolts$$Function$$- speed$- speed$$- MIL control lamp (Check Engine Warning)$- Indicator lamp$- High beam control lamp$- Oil pressure$control lamp - Tank reserve control lamp (if present)$- Alarm ON control lamp$$The following are not available:$$- ABS$control lamp (if present)$- 6th gear control lamp (if present) - Charge control lamp (if present) - Fuel$gauge (if present)